Job Information
SpaceX Automation & Controls Engineer, Launch Pad (Starship) in Starbase, Texas
Automation & Controls Engineer, Launch Pad (Starship) at SpaceX
Starbase, TX
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
AUTOMATION & CONTROLS ENGINEER, LAUNCH PAD (STARSHIP)
SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond. Starship will be the world's most powerful launch vehicle ever developed, with the ability to carry in excess of 100 metric tons to Earth orbit.
We are looking for an automation & controls engineer to help SpaceX develop and build launch systems for Starship. This role will be focused on electrical control systems for the launch mount and integration tower, including I/O systems, motion systems, and supporting infrastructure.
The successful applicant will be joining, and be supported, by a highly talented team of engineers with an amazing track record in developing any type of automated solution imaginable.
RESPONSIBILITIES:
Electrical systems:
Architect, design and integrate control systems for the Starship Launch pads
Design industrial electrical control panels which are NFPA79/NEC/UL508A compliant
Design control and data acquisition systems
Design and author electrical schematics
Design electrical conveyance and distribution systems (e.g. raceways, cables, wiring methods)
Work closely with other disciplines. Interface control systems with high power equipment and communication equipment.
Design electrical systems for hazardous environments
Control software:
Architect, write, and debug PLC code with an emphasis on generating code that is organized, structured, documented, maintainable and reusable for similar applications
Configure, commission and tune VFDs for open and closed loop control system applications
Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting
M echanical integration:
Add detail for electrical assemblies to CAD models to plan out install for cable tray, conduit, panel mounting, etc.
General responsibilities:
Participate in initial equipment conceptual development and carefully balance product specifications, process requirements, layout complexity, cost, and lead-time limits
Manage electrical cabinet builds, field wiring, and conveyance installs
Set, implement, and maintain schedules and budgets to ensure project completion
BASIC QUALIFICATIONS:
Bachelor's degree in an engineering discipline
1+ years of experience in the design and commissioning of controls systems for industrial applications (internships experience qualifies)
PREFERRED SKILLS AND EXPERIENCE:
Experience with Industrial and process automation & control systems.
Experience architecting, designing and integrating various industrial control systems.
Electrical schematic CAD experience using EPlan
Mechanical design experience with CAD such as Siemens NX or SolidWorks
PLC programming experience
HMI and SCADA programming experience
Field bus networks, serial communication and Ethernet communication
Hands-on experience building and commissioning high quality electrical control panels and electro-mechanical systems
Knowledge of NEC, UL508A codes
Excellent communication skills both written and verbal
Experience in fast-paced iterative design and test environments
Experience solving complex problems with little to no supervision on schedule as an individual or as a member of an integrated team
Strong work ethic and drive to succeed as part of a high functioning team
Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment
Ability to thrive in ambiguity, independently drive project progress, and manage multiple priorities
Demonstrated ability to design, implement and troubleshoot control systems
Fundamental understanding of engineering principles behind electronic equipment, instrumentation, and commonly used industrial equipment
Select and size electrical and electromechanical components such as servo motors, controllers, and VFDs.
Experience designing and installing instrumentation and control systems in hazardous areas (NFPA 70 Section 500 installations); Class 1, Division 1 and Division 2 environments or IEC equivalence
Experience tuning PID controllers
Experience with electrical power distribution, working knowledge of NFPA 70 and NFPA 70E
First-hand experience with programming and software development
Experience with industrial bus protocols such as Modbus, Profinet and EtherNet/IP
ADDITIONAL REQUIREMENTS:
Must be willing to work extended hours and/or weekends as needed
Must be willing to travel for extended periods, up to 100% during system activation
Ability to pass Air Force background checks for Cape Canaveral and Vandenberg
COMPENSATION AND BENEFITS:
Pay range:
Automation & Controls/Level I: $100,000.00 - $120,000.00/per year
Automation & Controls/Level II: $115,000.00 - $135,000.00/per year
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year.
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here (https://www.pmddtc.state.gov/?id=ddtc_kb_article_page&sys_id=24d528fddbfc930044f9ff621f961987) .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000.
