Job Information
WIN Waste Innovations Maintenance Manager in Poughkeepsie, New York
WIN Waste Innovations is looking for a Maintenance Manager is responsible for the management of all activities related to operations and development of the facility in conjunction with the Operations and Plant Manager. They will also be responsible for the safe, proper, and efficient operation and maintenance of the facility in accordance with company policies and standards, under the direction of the Plant Manager. They will manage and coordinate Maintenance activities to include but not be limited to installing, inspecting, testing, repairing, adjusting, and calibrating all plant equipment and instrumentation.
Responsibilities:
Plans, assigns, and supervises the work of the operations, maintenance (where applicable) and labor departments during daily operations and plant outages
Responsible for developing, maintaining, and instituting operating and emergency procedures
Makes daily inspections of plant machinery and equipment; inspects ongoing activities for safety and environmental compliance, and for adherence to standard operating procedures
Assign daily work to team based on priority, working with the Operations department. Ensure alignment amongst departments. Ensure communication is established and consistent with the departments on-call schedule and contact information for specified events
Responsible for implementing an effective training program that ensures that employees meet minimum requirements of job classification and are adequately prepared to assume all responsibilities of their assigned positions
Assists the plant manager in developing operational and maintenance budgets and strategies
Manages and directs mechanical and E&I maintenance function of plant, in accordance with appropriate company safety and maintenance standards and procedures. Analyzes and resolves work problems or assists workers in solving work problems. Initiates or suggests plans to motivate workers to achieve work goals
Supervises all mechanical and E&I maintenance department activities including, but not limited to preventative, predictive, corrective, emergency, contracted and warranty service
Prepares, authorizes, and schedules completion of work orders for equipment repair and maintenance
Selects, supervises, trains, develops, and evaluates performance of maintenance staff
Administers predictive analysis program for all mechanical and electrical systems and equipment
Schedules and monitors performance of all outside contractors to ensure effective, safe plant maintenance and operation
Oversees maintenance of all facility mobile equipment
Develops and maintains record of plant maintenance, including work orders, P.M., lubrication planning, planned and unplanned outages and inspections. Prepares work orders indicating malfunctions of instruments and authorizes work order requests. Requisitions new parts and instruments. Plans and supervises repair and maintenance during major outages
Utilizes and maintains CMMS in accordance with company policy
Recommends and maintains appropriate spare parts inventory in accordance with company policy
Oversees management of Maintenance Shop. Inspects and tests shop equipment, including new and repaired instruments, to verify dimensions of parts for conformance to quality control standards. Interprets specifications, blueprints, and job orders to workers, and assigns duties
Provides guidance and direction to facility staff members
Responsible for maintaining acceptable plant morale
Responsible for maintaining plant cleanliness
Develops operational performance and productivity goals in conjunction with the Operations and Plant Manager via the annual business plan and continuously strives to meet or beat those goals
Efficient management of the company's operations standards
Ensures customer satisfaction
Administers/enforces the lockout/tagout system
Sets productivity goals and is accountable for meeting those goals
Fosters and promotes a culture of teamwork between operational staff and all other plant staff
Prepares specifications to be used in the negotiation of bids, contracts, and rate estimations for new business
Maintains staffing levels consistent with approved budget
Conducts performance evaluations; hires, develops, and manages staff. When necessary, takes appropriate disciplinary action in accordance with company policy
Provides daily supervision over assigned staff and is responsible for the preparation of the maintenance shift schedules
With management team, prepares budget and is accountable for meeting operational goals by way of an established maintenance department
Reads, analyzes, and interprets common scientific and technical journals, financial reports, and legal documents
Responds appropriately to common inquiries or complaints from customers, regulatory agencies, or members of the business community
Completes the Corporate and Plant Training Programs within the time frame prescribed
Ensures that the facility and all personnel operate safely at all times and promotes an environment whereby safety is a priority. Follows standard safety procedures, corrects safety and environmental hazards. Reads, understands, and implements lockout/tagout, safety rules, job hazard analyses, operating and maintenance instructions, and procedure manuals
Thoroughly and promptly investigates any accidents or near misses in conjunction with the Environmental compliance manager as well as the Health & Safety manager to ensure that any unsafe practices or conditions are addressed and eliminated immediately
Communicates clearly and concisely both verbally and in writing; as well as communicates clearly whether using in-situ intercom system, two-way radio, or face to face
Anticipates typical problems, identifies potential or recurring problems, and takes appropriate action. Troubleshoots equipment and assists in diagnosing problem areas
Plan and conduct major outages; unscheduled and scheduled.
Implement and direct effective PM program, lubrication plans, installation, troubleshooting, cleaning, inspecting and maintenance of mechanical and electrical equipment throughout the facility in a safe and professional manner.
Preferred Requirements:
Bachelor's degree from an accredited College or University with a major or minor in an area related to the above responsibilities and 6 -- 8 years related experience or equivalent combination of education and experience
3 - 5 years of supervisory or management experience
Knowledge and understanding of the operation, maintenance and control of a steam generating power plant
Proficient with Microsoft Software; Excel, Word, Office, etc.
Experienced in using CMMS
Travel may be required, 0 -- 25%
Certificates and Licenses:
- Licenses as required by Local, State, Federal, Environmental and/or Health/Safety Regulatory agencies.
Work Environment:
Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
Noise in work environment
Maintain positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management.
Physical Demand:
Stand
Sit for prolonged periods of time
Walk
Handle tools, equipment, fine motor skills
Reach with hands and arms
Climb and walk on heights often greater than 4 feet
Stoop, kneel, bend, push, pull, crawl
Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations
Lift 50 lbs.
Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces
Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise
Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire
Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units
Access confined spaces and pressure vessels through standard 12" by 16" manways
PPE Required:
Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue:
Negative pressure respirator
Positive pressure respirator
Self-contained breathing apparatus (steel or composite bottle)
Hardhat
Approved safety shoes
Eye protection
Rubber suit and gloves
Chemical resistant suit
Heat resistant outerwear
Flame resistant outerwear
Approved hearing protection
Gloves
Safety harness
What You'll Enjoy:
Industry leading benefits
Multiple and flexible medical plans
Outstanding PTO program
Floating Holidays
Strong 401k program and company match
Tuition reimbursement plan
College loan reimbursement
College scholarship program for dependents
Parental Leave Program
Inclusive culture
Employee engagement events
Employee resource groups
WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream.
At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.