Job Information
M. C. Dean UPS Technician 2 - Portland, OR in Portland, Oregon
UPS Technician 2 - Portland, OR
ID 11152
Location Portland, OR
Apply Now (https://phg.tbe.taleo.net/phg04/ats/careers/v2/applyRequisition?org=MCDEAN&cws=62&rid=11152)
The Critical Power Group is responsible for maintaining, servicing, and troubleshooting UPS systems, batteries, and other critical infrastructure equipment. Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., MGE/APC, Liebert, Toshiba/Mitsubishi, and Powerware/Eaton to name a few). Our technicians perform preventive maintenance and equipment testing as well as emergency service calls at high profile government, institutional and commercial customer facilities. The Critical Power Group also provides engineering and technical support to customers and other divisions of M.C. Dean, Inc.
Duties and Responsibilities:
Daily travel with independent work structure
Emergency call availability 24/7 unless on PTO or Off Call.
Maintain safeguard company issued equipment, tools, and instruments
Installation and repair of static switch and PDU systems
Perform required preventative maintenance service to equipment under contract as scheduled.
Customer contact and interface
Communicate availability status to corporate office
Communicate availability status to Team Lead or manager
Protect company proprietary information, manuals, and records
Use of electronic and electrical test equipment as necessary
Coordinate and manage all on-site subcontractors hired by M.C. Dean as necessary
Maintain company or personal vehicle in safe and operational condition; maintain insurance as required by company.
Ensure that work is performed to M.C. Dean standards
Complete all paperwork, including Field Service Reports, Time Sheets, and Expense Reports, and other job required reports timely and accurately
Provide technical support to customers upon request
Maintain Technical documentation for study and/or review
Willing and able to attend product specific training as company deems necessary
Cross train others as needed
Other duties as required
Inspect static swath systems associated with power backup systems and their associated controls. Inspections include, but are not limited to Initial, In-process, Visual Condition, and Final Inspections, Maintenance Operational Checks, and Failure Analysis, and repairs.
Certifies by signature to the customer that systems and components adhere to quality standards established by applicable codes, publications, checklists and specifications.
Reviews and checks system drawings and specifications for accuracy and completeness. Determines maintenance requirements, inspection requirements, and compliance with technical standards. Resolves discrepancies between recorded and actual system components by research with owner/manufacturer or by physical inspection. Corrects and certifies changes entered for record.
Provides technical assistance and expertise to owners and engineers. Performs inspections, technical assistance, maintenance assistance, and instruction of site personnel and engineers. Advises site personnel on proper maintenance practices, procedures, and techniques. Reviews and interprets existing technical publications applicable to inspection, modification, and maintenance of power electronics. Resolves technical problems encountered. Prepares reports of findings and makes recommendations on system improvements and implementing quality control programs.
The physical demands are represented of those that must be met by an employee to successfully perform the essential functions of the job, including lifting and installing batteries. Company expects the employee to observe all safety standards.
Maintains operational expertise with the following instruments:
Digital Multi-meter
Micro Ohm-meter
Insulation Test Equipment
Battery Test Equipment (Alber/Midtronics)
Requires 7X24X365 availability when on call. May require overnight travel at company expense.
Performs other duties as assigned.
Supervisory Controls:
Work is performed under general supervision of the Regional Mangers and Team Leads. Receives assignments in terms of schedules, priorities, and general instructions pertaining to special problem areas. Is afforded freedom of action within the framework of established policies, procedures, and production schedules; accomplishing assignments on own initiative. Completed work is subject to review for adherence to policy, soundness of recommendations, and overall accomplishment of organizational tasks and functions.
The primary purpose of this position is to provide inspection and certification of power electronics and their key components. The end goal is to obtain reliability, availability & quality of power while improving or sustaining the maintainability of the electrical system.
Qualification Requirements
AA/BS degree in Electrical and/or Electronics from an accredited college or university, or equivalent training from field or military position.
This position requires at least two (2) years of experience with various UPS systems, batteries, test equipment, andassociated electrical apparatuses like switchgears, panels, breakers, disconnects, ATSs, and generators.
Proficiency in reading and interpreting schematic diagrams.
Strong working knowledge of NEC, maintenance practices, maintenance and supply procedures, and quality control procedures.
Demonstrated ability to diagnose malfunctions and employ testing and inspection techniques.
Use of laptop computer, various software packages and other electronic communication devices will be required.
Requires strong written and oral communication skills.
Future training and certification requirements: Various Manufacturer Maintenance Courses.
Proficient in Microsoft Office products.
Abilities:
Lifts at least 100 pounds at one time and 60 pounds for an extended period.
Relocates a 12-foot stepladder without assistance.
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls, and reaches overhead on a routine and repetitive basis.
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
May use a standard ladder without exceeding the weight limit while carrying tools.
Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
Apply general rules to specific problems to produce answers that make sense.
Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
See details at close range (within a few feet of the observer).
Listen to and understand information and ideas presented through spoken words and sentences.
#AG
Applicants for this position may be required to obtain or provide proof of flu shots or of other vaccinations depending on customer requirements and nature of the position or demonstrate a valid basis for exception.
EOE Minorities/Females/Protected Veterans/Disabled
VEVRAA Contractor
M. C. Dean
-
- M. C. Dean Jobs