Easter Seals Jobs

Job Information

U.S. Air Force - Agency Wide AIRCRAFT WORKER in Naval Air Station Pensacola, Florida

Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to perform aircraft worker duties such as removing, inspecting, cleaning, repairing, adjusting, and installing components and parts, and to assist higher grade aircraft mechanics in more complex tasks. Responsibilities -Removes major components of aircraft structure or systems such as control surfaces, fairing, access panels, doors, hatches, landing gear assemblies, engines, activator units, tubing, electrical wiring, and control cables. - Performs repairs of limited complexity such as removing worn or damaged gaskets, pneudraulic lines, and couplings, fuel cells, cables, and pulleys, determining when they may be cleaned and reinstalled, or must be replaced. - Works with higher grade mechanics to accomplish larger and more complex operations such as jacking and leveling aircraft, installing and adjusting engines, landing gear assemblies, instrument panels, and flight control systems. - Accomplishes operational and maintenance record keeping, both manual and automated, associated with aircraft maintenance and repair. - Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Requirements Conditions of Employment Qualifications This is a TERM POSITION Not to Exceed 36 Months. In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800, Aircraft Overhaul Group, Aircraft Mechanic. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to do the work of the position without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of the operations and functions of a number aircraft components and parts, and the methods of removal and installation so that the parts and components are not damaged or misaligned. 2. Knowledge of a number of less complex aircraft systems, subsystems, and assemblies such as ejection seats, nuclear shielding, or similar self-contained systems. 3. Knowledge of safety regulations, practices, and procedures. 4. Knowledge of operational and maintenance records, both manual and automated, and of the terminology and format to report work performed. 5. Skill in locating and correcting such problems as improper travel, or excessive friction or play between parts. 6. Skill in the care and use of hand and power tools such as pneumatic wrenches, speed wrenches, ratchet wrenches, and end wrenches, and the pattern of tightening and amount of torque to apply to assure a solid connection. Skill in the use of measuring instruments such as torque wrenches, micrometers, go-no-go gauges, multimeters, feeler gauges, and tension meters. Ability to recognize a variety of parts and components such as gaskets, couplings, control cables, gear boxes, and flight control surfaces, and when they may be cleaned and reinstalled, or must be replaced. Ability to read and understand specific directions including disassembly, assembly, and adjustment directions to replace control cables and pulleys, lace in fuel bladders, and reinstall hydraulic lines, air ducts, and inspection plates. Physical Effort: The work requires moderate to strenuous effort. Must climb, bend, stoop, crawl, and stand for prolonged periods on concrete or metal surfaces. Frequently lifts parts and equipment weighing up to 20 pounds. Occasionally may lift and carry items that weigh about 50 pounds with mechanical lifting devices or with assistance from other workers. Working Conditions: Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. May be exposed to intake suction and hot exhaust blast. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education Additional Information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information. Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position. Temporary and Term Appointments: If you are selected for a temporary or term position in the competitive service, your appointment may be extended to the maximum period allowed by law without further competition. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement. Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here. If you have questions regarding this announcement and have hearing or speech difficulties click here.

DirectEmployers