Job Information
McDermott Associate Quality Inspector ( E&I discipline ) in Batam, Indonesia
Company Overview:
People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.
Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Here, what you do matters.
Job Overview:
The Quality Inspector applies their conceptual knowledge of inspection and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward inspection problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Quality Inspector understands key business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.
Perform field inspection of fitting and welding in accordance with project specification and scope as noted in the ITP. Review and familiarize with Project AFC drawing, NDT drawing, ITP, Work Instruction and Project specification relating to assigned project. Execute the inspection and Quality Control activities on site, collecting the relevant objectives proofs, ensuring monitoring and coordination of quality control activities on electrical and instrument equipment/system construction, installation and mechanical completion activities. Conducting business & performing duties in accordance to McDermott’s " Code of Business Conduct" and any other governing of the company.
Key Tasks and Responsibilities:
Assist the Senior Quality Inspector/Quality inspector in determining product conformity to customer specifications through independent inspections, daily surveillances, and tests by the Project Quality Plan
Identify non-conformity for rectification and ensure final resolution
Assist the Senior Quality Inspector/Quality Inspector in appraising product quality to determine conformity and non-conformity in accordance to the approved drawings and inspection & test plan
All inspection results need to be documented, and if non-conformity exists, documentation shall be raised to establish corrective action
Assist the Senior Quality Inspector /Quality Inspector in coordinating the interface with operations, Certifying Authority, Client, Job Sharing, personnel, and subcontractor, assuring the conformity to project specifications
Assist the Senior Quality Inspector/Quality Inspector in performing field inspections by project specifications and scope of work as noted within the Project Quality Plan/ITPs
Assist the Senior Quality Inspector/Quality Inspector in confirming adherence to applicable procedures and plans by effective audit and surveillance
Determine product conformity to customer specifications through daily surveillances and ITP inspection points in accordance with the Project Quality Plan
Identify non-conformity for rectification and ensure final resolution
Appraise product quality to determine conformity and non-conformity in accordance with the approved drawings and inspection & Test Plan; All inspection results need to be documented, and if non-conformity exists, documentation shall be raised to establish corrective action
Coordinate interface with Operations, Certifying Authority, Client, Job Sharing personnel, and subcontractor, assuring the conformity to project specifications
Exercise a proactive approach to the prevention of a problem by interacting with Production, Engineers, and Management personnel
Liaise with customer representatives, ensuring product conformity and stage release for each activity denoted within the Project Quality Plan/ITP
Executes the specific inspections on materials, equipment and construction/installation activities on site.
Issues the relevant QAN-Quality Advise Note and, when necessary, writes and sends to QC Supervisor nonconformances reports, update the corrective action progress by weekly basis.
Work with E&I Construction to rectify Client Site Issue, update the progress by weekly basis.
Checks cable pulling, laying routing, bending radius, spacing between instrument cable, power cable (Low Voltage, Medium Voltage, High Voltage), tie wrapping, physical damage, and cable identification, tagging, Marking, numbering, etc as per spec, and AFC drawing, and cable schedule.
Check cable glanding, follow gland specification (universal Gland, or Barrier Gland, Brass gland or nickel-plated gland, sizing, etc).
Witnessing wiring terminations, correct ferruling/cable lug types and sizing, relevant loop checks, based on AFCwiring, layout drawing.
Witnessing cable cores Continuity Test, Insulation Test/Meagering.
Work with preservation team to energize Motors/Generators, Space heaters, insulation test start from receiving untilhandover to commissioning.
Advise Mechanical Completion Team to updates as built drawings (if necessary).
Perform punch-listing operations while performing MC-ITR (Mechanical Completion-Inspection & Test Records).
Checks power transformers, switchboard, accumulator battery, socket outlet, lighting system, Turbine Generators, Compressors.
Performs visual inspections, dimensional test, checks rating and material for connection.
Performs tests of continuity, insulation resistance for above ground cabling underground cabling.
Witnessing Calibration of Safety valves, shutdown valve.
Witnessing calibration of instruments.
Checks installation of instruments, Wiring, lay out based on AFC-wiring, layout drawing.
Work with Mechanical Completion team to performs test functional instruments.
Checks pneumatically signal connection.
Witnessing and check fiber optic cable testing, installation on platform.
Witnessing and check fiber optic cable testing, installation intended for subsea cable.
Witnessing and check testing of communication functionalities.
Verify special processes and the relevant worker's qualifications.
Witness the tests, controls and inspections carried out.
Check conformity with the Quality Control Plan, obtain the relevant documentation, and check procedures andequipment to be used in tests, controls and inspections, manage documents certifying test, controls and inspections.
Ensure the correct implementation of the approved inspection Test Plan.
Ensure installation of Electrical Apparatus, instruments are complying with Hazardous Area Classification.
Coordination, monitoring, reporting & technical assistance during fabrication & installation activities.
Constant coordination with other engineering units, Process Engineer, and all relevant dept involved specially,structure, piping department for relocation need.
Review E&I specifications versus implementation, review AFC-approved for Construction Drawing and advisepreparation of As-Builts drawing (if deem necessary).
Preparation of work method statement.
QA/QC Inspection and documentation.
Perform monitoring and inspection of the following installation:
Support/Bracket/Stanchion for Cable trays, cable ladders, Switchgear (MCC-Motor Control Centre), Control Centre (CCR-Central Control Room), transformers (Step Up & Step Down), Resistors (NGR-Neutral Ground Resistors), Compressors, Turbine Generators, Diesel Generators, Ground resistance for electrical grounding system, Fire alarm/protection system, PAGA, Smoke detector, gas detector, Flame Detector, Heat Detector, Manual Alarm Call Point, Telecommunication facilities, conduit and fittings, lighting, fittings, control panel, telecommunication works, Junction Box, Installation of control valve, safety valve, Pressure Valve, Level Valve, Flow Valve, Temperature Valve, Pressure Transmitter, Level Transmitter, Flow Transmitter, Temperature Transmitter, Pressure Indicator, Level Indicator, Flow Indicator, Temperature Indicator, Field Electrical/Instrument items, Impulse Piping, Tubing, Heat Tracing, etc.
Constantly regular coordination with Client as well as commissioning team for any nonconformance found.
Attend regular basis of E&I construction and Quality meeting with Client, and relevant Process Engineers.
Qualified to perform inspection of Hazardous Area/Potentially Explosive Atmosphere - Certified by Comp ‘Ex’ Hazardous Area Classifications
Qualified to perform inspection of oil and gas Instrument -Certified by Indonesian MIGAS-oil & gas Industries Instrument Inspector for Indonesian projects.
High standard of safe working practice, quality and productivity as well as compliance with the code of businessconduct.
Essential Qualifications and Education:
Under graduated Degree / Senior High School
5+ years Quality control or related experience in Weld, Paint, Material Electrical, Instrumentation, Telecommunication and Equipment Inspection
Preferred Qualifications and Education:
- ATEX Certification
#LI-DL1
McDermott is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, genetic information, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.
McDermott
-
- McDermott Jobs